EXIS
Switch boards for integration into intrinsically safe equipment, with low-power fanless design, protected power input, Gigabit Ethernet, fiber uplinks and isolated serial-interface options.
- Intrinsically safe power and circuit design for mines, tunnels and similar industrial environments
- Board-level form factor for integration into intrinsically safe equipment and custom enclosures
- Fanless passive cooling and wide-temperature operation
- Reverse-polarity, overvoltage and overcurrent protection
Models
4 models
MB-EXIS2360-6GT8GS4RS2CAN-BP Intrinsically Safe Managed Switch Board
MB-EXIS2360-6GT8GS4RS2CAN-BPIntrinsically safe managed switch board with 6 Gigabit copper ports, 8 Gigabit SFP ports, 4 isolated RS-485 and 2 isolated CAN interfaces, a single 12 VDC power input and one bypass channel.
#intrinsically-safe#gigabit#rs485#can#bypass#embedded
MB-EXIS2200-4GT2GS2RS Intrinsically Safe Managed Switch Board
MB-EXIS2200-4GT2GS2RSIntrinsically safe managed switch board with 4 Gigabit copper ports, 2 Gigabit SFP ports, 2 isolated RS-485 interfaces and a single 12 VDC power input.
#intrinsically-safe#gigabit#rs485#embedded
MB-EXIS2360-8GT4GS4RS Intrinsically Safe Managed Switch Board
MB-EXIS2360-8GT4GS4RSIntrinsically safe managed switch board with 8 Gigabit copper ports, 4 Gigabit SFP ports, 4 isolated RS-485 interfaces and a single 12 VDC power input.
#intrinsically-safe#gigabit#rs485#embedded
MB-EXIS7201-8GT4XS Intrinsically Safe 10GbE Managed Switch Board
MB-EXIS7201-8GT4XSIntrinsically safe 10GbE managed switch board with 8 Gigabit copper ports and 4 10GbE SFP+ ports, with Layer 3 routing, ERPS and TSN support.
#intrinsically-safe#10gbe#tsn#embedded
Compare Models in This Series
Select 2–4 modelsSelect models to compare ports, speeds, PoE, power input, operating temperature, mounting and other key specifications.
| Specification | MB-EXIS2360-6GT8GS4RS2CAN-BP Intrinsically Safe Managed Switch Board MB-EXIS2360-6GT8GS4RS2CAN-BP | MB-EXIS2200-4GT2GS2RS Intrinsically Safe Managed Switch Board MB-EXIS2200-4GT2GS2RS |
|---|---|---|
| Console Port | 1 console port, RJ45 | 1 console port, RJ45 |
| Cooling | Fanless passive cooling | Fanless passive cooling |
| Dimensions | 185×140×37.4 mm (W×D×T) | 100×130×19.7 mm (W×D×H) |
| Downlink Ports | 6×10/100/1000Base-T in six 1×1 RJ45 connectors | 4×10/100/1000Base-T |
| Forwarding Rate | 20.8 Mpps | 8.93Mpps |
| Input Voltage | DC 12V | DC 12V |
| MAC Address Table | 8K | 4K |
| Mounting | Board-level | Board-level |
| Operating Humidity | 5%–95% RH, non-condensing | 5%–95% RH, non-condensing |
| Operating Temperature | −40°C to +85°C | -40°C–+75°C |
| Packet Buffer | 3 Mbit | 2 Mbit |
| Power Connector | 2-pin 5.08 mm Phoenix terminal block, single power input | 1×3 3.81 mm Phoenix terminal block, single power input |
| Power Consumption | <12 W | ＜7.5W |
| Power Protection | Reverse-polarity, overvoltage and overcurrent protection | Reverse-polarity, keyed-connector, overvoltage and overcurrent protection |
| Reset Button | Short press to reset; press and hold to restore factory defaults | Supported |
| RS-485 | 4 isolated RS-485 interfaces on a 2×6-pin 5.08 mm Phoenix terminal block | 2 isolated RS-485 interfaces on a 1×2×3 3.81 mm terminal block |
| Switching Capacity | 56 Gbps | 14 Gbps |
| Uplink Ports | 8×1000Base-X SFP in four 2×1 SFP cages | 2×1000Base-X SFP |
| Weight | Approximately 0.4 kg | 0.12kg |
| BYPASS | 1 channel | — |
| CAN | 2 isolated CAN interfaces on a 1×6-pin 5.08 mm Phoenix terminal block | — |
| DIP Switch | 1 one-touch ring switch and 1 reserved customizable switch; disabled by default | — |
| EMC Immunity | IEC 61000-4-5 Level 3 surge, IEC 61000-4-4 Level 2 EFT and IEC 61000-4-2 Level 3 ESD immunity | — |